Home About us Products Models News Honor Network Contact us Substation
location:Home > bearing for drum pulleyNews > Analysis of causes of self aligning ball bearing

Products
More models
Deep Groove Ball Bearing
KA Nylon Retainer Bearing
Deep Groove Ball Bearing
Black Chamfer lmported Process Bearing
35 Class Spherical Roller Bearing
36 Class Spherical Roller Bearing
Lightweight Spherical Roller Bearing
Self-Aligning Ball Bearing
One Way Backstop Bearing
Analysis of causes of self aligning ball bearing
Clicks:23066 Date:12-11
The vibration system consisting of steel degree, flexibility, mass and damping determined by the design parameters of self aligning ball bearing will generate vibration that is suitable for its operation under operation conditions.
The less the deviation caused by the deviation in the manufacturing process, the smaller the vibration. The ball surface roundness, waviness and surface roughness is the most important factor on the vibration of the self aligning ball bearing parts, the shape error and the surface of inner ring and outer ring raceway roughness is self aligning ball bearing again, cleanliness and lubricant quality etc..
Operating conditions such as installation conditions, speed, the direction of the load under the axial direction, the amount of value and so on.
Self aligning ball bearing rolling self aligning ball include deep groove ball bearing, self aligning bearing, ball linear motion self aligning ball bearing (thrust roller, ball, ball and so on), according to the above different criteria can be divided into the following aspects:
1. Tapered roller self aligning ball bearing
1. The inner and outer raceways are flaking, serious wear and crack in the inner and outer rings.
2. In the long direction of the roller, the forward shift of the center is more than 1.5mm, and the front-end of the cone roller is more than 2~3 mm.
3. The cage is worn, and the roller can not be closed in the inner ring. The rupture and deformation can not be repaired.
Two, plane self aligning ball bearing
1, two raceway washer peeling and serious wear.
2, breaking ball or pits.
3. The cage has a serious deformation and can not close the ball.
Three, deep groove ball self aligning ball bearing
1. The inner and outer raceways are flaking, serious wear and crack in the inner and outer rings.
2. The ball loses round or surface exfoliation, and there is a crack.
3. The wear of the cage is serious.
4, the rotation has the noise and the vibration, when the stop has the braking phenomenon and retrogression reversal.
5, the gap of self aligning ball bearing exceeds the maximum clearance.
Previous article: Principle of self aligning ball bearing and principle of load preload      Next article: Main factors affecting the vibration noise of self aligning ball bearing
Recommended reading
How to repair the self aligning ball bearing overheating problem? 2018.1.15
Causes and maintenance measures that cause damage to self aligning bal 2017.12.23
Causes and treatment methods for oil leakage of self aligning ball bea 2018.1.4
Recommended products
bearing 6310 C4 for idler
bearing 6310 C4 for idler
bearing 6309 C4 for idler
bearing 6309 C4 for idler
bearing 6308 C4 for idler
bearing 6308 C4 for idler
bearing 6307 C4 for idler
bearing 6307 C4 for idler
 
Corporate Information
Home
Abouts Us
Products
News
Honors
Substation
 
Contacts
+86 635 5638235
Fax:+86 635 5638808
Address:Xu Village Industrial Garden, Gan Town, Guan County, Shandong
 
Follow us
 
Copyright © 2017 Shandong Xinkaite Bearing Co.,Ltd.